ar8350d5050ch

Remove/install the air conditioning's evaporator fan (roof equipment)

Typ ar · temat 83.50 · wersja 0100 · 2011-07-27

Dotyczy: MODEL 900 with CODE (HK4) Rear air conditioning, reinforced

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.50 Układ klimatyzacji tyłu pojazdu — Seria 900

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.32 Obudowa/wymiennik ciepła/parownik/filtr — Seria 900

AR83.50-D-5050CH

Remove/install the air conditioning's evaporator fan (roof equipment)

18.7.11

MODEL 900 with CODE (HK4) Rear air conditioning, reinforced

Remove/install the air conditioning's evaporator fan (roof equipment)

D83.50-1318-09

1 Screw

2 Wiring harness

3 Cable tie

A32m1 Evaporator blower motor 1

A32m2 Evaporator blower motor 2

4 Electrical connector

5 Wiring harness

Remove/install

Danger!

Risk of death caused by falling down from the roof of the vehicle. Risk of injury to other persons caused by falling objects during work in the area of the roof.

AS65.00-Z-0002-01A

1

Remove roof air conditioning cover

AR83.30-D-1300CH

2

Expose electrical wiring harness (2) of blend air flap actuator motor

When removing left blower motor 1 evaporator (A32m1).

Installation: Install new cable ties.

3

Expose electric wiring harness (5)

Installation: Replace cable tie (3).

4

Disconnect electrical connector (4)

5

Remove bolts (1)

6

Remove blower motor 1 evaporator (A32m1) or blower motor 2 evaporator (A32m2)

Installation: Check sealing of blower motor 1 evaporator (A32m1) or blower motor 2 evaporator (A32m2) for damage, replace if necessary.

7

Install in the reverse order

Powiązane dokumenty