Remove/install operating unit for climate control

AR83.40-D-6348TS

Remove/install operating unit for climate control

13.12.2017

Model

907, 910

Shown on model 907 with code HH4 (THERMOTRONIC automatic climate control)

1

Operating unit for climate control

3

Adhesive strips

2

Electrical connector

Shown with CODE HH4 (THERMOTRONIC automatic air conditioning)

1

Operating unit for climate control

4

Guides

5

Grooves

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

2

Attach suitable adhesive strips (3) at left and right of operating unit for climate control (1)

 The adhesive strips (3) are used as a protective base.

3

Unclip operating unit for climate control (1) (arrows) and remove far enough until the electrical connector (2) is accessible.


Carefully unclip operating unit for climate control (1).
Otherwise, the cover on the instrument panel cover or on the operating unit for the climate control (1) may be damaged.

 Installation: Make sure that the guides (4) of the instrument panel engage correctly in the grooves (5) of the operating unit for the climate control (1).

 Clip remover

*452589016300

4

Disconnect electrical connector (2) and remove operating unit for climate control (1)

5

Install in the reverse order



Check

6

Perform function test of operating unit for climate control (1)