ar8330s7820ef

Remove/install refrigerant line between refrigerant compressor and front connecting point

Typ ar · temat 83.30 · wersja 0301 · 2019-09-12

Dotyczy: Model 447 with engine 622 with code HH4 (THERMOTRONIC automatic climate control) Model 447 with engine 622 with code HH9 (Air conditioner, automatic heater control)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.30 Układ klimatyzacji — Seria 447 · Seria 622

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.13 Przewód sztywny/elastyczny/zawór — Seria 447 · Seria 622

AR83.30-S-7820EF

Remove/install refrigerant line between refrigerant compressor and front connecting point

26.08.2019

Model

447 with engine 622

with code HH4 (THERMOTRONIC automatic climate control)

Model

447 with engine 622

with code HH9 (Air conditioner, automatic heater control)

Remove/install refrigerant line between refrigerant compressor and front        
	connecting point

S83.30-4660-09

Shown on model 447 with engine 622.9

1

Refrigerant line

4

Bracket

6

Refrigerant line

2

Refrigerant line

5

Bracket

7

Refrigerant compressor

3

Hose line

Danger

Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0007-01A

Warning

Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.

AS83.00-Z-0006-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Procedure for a damaged or leaky air conditioning system

AH83.30-N-0004-01A

Topical note

Protect air conditioning circuit and components from moisture when carrying out repair work

AH83.30-N-0005-01A

Notes on handling refrigerant R1234yf

AH83.30-P-0003-02A

Notes on handling refrigerant R134a

AH83.30-N-0003-01A

Remove/install

1

Discharge air conditioning system.


Model 447 except code HX1 (R-1234yf refrigerant)

AR83.30-S-1760E

Model 447 with code HX1 (R-1234yf refrigerant)

AR83.30-S-1760EF

2

Remove charge air pipe.


Model 447 with engine 622.8

AR09.41-S-1311EH

Model 447 with engine 622.9

AR09.41-S-1311EF

3

Detach refrigerant line (1) from refrigerant line (2) and seal with suitable stop plugs.

Compressor oils (specification 362.1)

BB00.40-P-0362-01A

Installation: Replace sealing rings and moisten with compressor oil.

Threaded connection, refrigerant line to refrigerant line

*BA83.30-N-1017-01A

Record plug

*129589009100

4

Detach refrigerant line (6) from refrigerant line (1) and seal with suitable stop plugs.

MODEL 447 with CODE HZ7 (Semi-automatically controlled air conditioning, TEMPMATIC in rear)

Compressor oils (specification 362.1)

BB00.40-P-0362-01A

Installation: Replace sealing rings and moisten with compressor oil.

Threaded connection, refrigerant line to refrigerant line

*BA83.30-N-1017-01A

Record plug

*129589009100

5

Remove holder from bumper.

AR88.20-S-2150E

6

Raise vehicle.

AR00.60-S-1000E

7

Detach refrigerant line (1) from refrigerant compressor (7) and seal with suitable stop plugs.

Compressor oils (specification 362.1)

BB00.40-P-0362-01A

Installation: Replace sealing rings and moisten with compressor oil.

Bolt, refrigerant line on refrigerant compressor

*BA83.30-N-1012-01A

Record plug

*129589009100

8

Unclip hose line (3).

Model 447 with engine 622.9
with code HH4 (THERMOTRONIC automatic climate control)
Model 447 with engine 622.9
with code HH9 (Air conditioner, automatic heater control)

9

Detach holders (4, 5).

10

Lower vehicle.

AR00.60-S-1000E

11

Remove refrigerant line (1) upward.

12

Install in the reverse order.

Air conditioning

Number

Designation

Model 447 with engine 622

BA83.30-N-1012-01A

Bolt, refrigerant line on refrigerant compressor

Nm

10

Air conditioning

Number

Designation

Model 447 with engine 622

BA83.30-N-1017-01A

Threaded connection, refrigerant line to refrigerant line

Nm

20

Remove/install refrigerant line between refrigerant compressor and front        
	connecting point

129 589 00 91 00

Record plug

Powiązane dokumenty