ar8330s5540a

Remove/install evaporator

Typ ar · temat 83.30 · wersja 0112 · 2009-12-04

Dotyczy: MODEL 638.0 /1 /2 with CODE (H06) Air conditioning

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 83 Klimatyzacja › 83.30 Układ klimatyzacji — Seria 638 (modele 0**, 1**, 2**)

EinPAS 39 Ogrzewanie/ wentylacja/ chłodzenie › 39.15 Klimatyzacja › 39.15.32 Obudowa/wymiennik ciepła/parownik/filtr — Seria 638 (modele 0**, 1**, 2**)

AR83.30-S-5540A

Remove/install evaporator

30.11.09

MODEL 638.0 /1 /2 with CODE (H06) Air conditioning

Remove/install evaporator

S83.30-2007-05

1 Clips

2 Heater housing cover

3 Evaporator

4 Gasket

5 Gasket

 	Remove/install
	When working on the refrigerant circuit, seal all openings with suitable caps in order to prevent unnecessary penetration by air humidity and dirt.
1	Remove heater housing		AR83.25-S-1000A
2	Unclip clips (1)	 18 clips (1) have been installed
3	Remove temperature sensor on evaporator		AR83.30-S-8085A
4	Remove heater housing cover (2)	 Installation: Replace sealing (5), check sealing (4) is correctly seated
5	Lift evaporator (3) out of lower section of heater housing	 Observe oil refill quantity when replacing evaporator (3)	*BF83.30-N-1004-01A
6	Install in the reverse order
7	Replace fluid reservoir		AR83.30-S-6520A

Air conditioning

Number	Designation			Model 638 with compressor 10PA17C	Model 638 with compressor 7SB16


BF83.30-N-1004-01A	Compressor oil refill quantity when replacing evaporator		cm3	40	40
		Specifications for Operating Fluids	Sheet	BB00.40-P-0362-00A	BB00.40-P-0362-00A

Air conditioning

Number	Designation			Model 638 with compressor SD7V16


BF83.30-N-1004-01A	Compressor oil refill quantity when replacing evaporator		cm3	40
		Specifications for Operating Fluids	Sheet	BB00.40-P-0362-00A

Powiązane dokumenty