AR83.30-P-5252C | Correct oil level in air conditioning system after replacing parts | 15.12.09 |
MODEL 129
with CODE (580) Air conditioning (or Tempmatic for USA)
with CODE (581) Automatic air conditioning
Refrigerant compressor 10PA17
| Perform work rapidly, compressor oil is hygroscopic. After evacuating refrigerant, add compressor oil evacuated to refrigerant circuit when recharging air conditioning. | ||
1 | Replace AC compressor and additionally fill in compressor oil | | |
2 | Replace condenser and additionally fill in new compressor oil | | |
3 | Replace evaporator and additionally fill in new compressor oil | | |
4 | Replace fluid reservoir and additionally fill in new compressor oil | | |
5 | Replace intake from evaporator to refrigerant compressor and additionally fill in new compressor oil | | |
6 | Replace pressure line from refrigerant compressor to condenser and additionally fill in new compressor oil | | |
7 | Switch on the air conditioner and allow the engine to idle for roughly 4 minutes. | Set temperature selector wheel to blue notches, or with automatic air conditioning set to "" Blowers to max. | |
8 | Check air conditioning for proper operation | The air oulet temperature at the center air vent should not drop below approx. |
Refrigerant compressor
Number | Designation | Refrigerant | Refrigerant | ||
BF83.55-P-1003-01A | Additional oil filling capacity when replacing condenser | Compressor oil | cm3 | 20 | 20 |
Specifications for Operating Fluids | Sheet | ||||
BF83.55-P-1004-01A | Additional oil filling capacity when replacing evaporator | Compressor oil | cm3 | 40 | 40 |
Specifications for Operating Fluids | Sheet | ||||
BF83.55-P-1005-01A | Additional oil filling capacity when replacing receiver/drier | Compressor oil | cm3 | 10 | 10 |
Specifications for Operating Fluids | Sheet | ||||
BF83.55-P-1006-01A | Additional oil filling capacity when replacing suction line | Compressor oil | cm3 | 20 | 20 |
Specifications for Operating Fluids | Sheet | ||||
BF83.55-P-1007-01A | Additional oil filling capacity when replacing pressure line | Compressor oil | cm3 | 20 | 20 |
Specifications for Operating Fluids | Sheet | ||||
BF83.55-P-1008-01A | Additional oil filling capacity when replacing refrigerant compressor | Compressor oil | cm3 | 20 | 20 |
Specifications for Operating Fluids | Sheet | ||||