Remove and install evaporator temperature sensor · ar8330d8085na · Mercedes-Benz WIS

AR83.30-D-8085NA

Remove and install evaporator temperature sensor

9.2.01

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODELS 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

D83.30-1110-11

1 Connector

2 Evaporator temperature sensor

 	Remove/Install
1	Disconnect ground cable from battery
2	Remove radio		AR82.60-D-7502A
3	Remove glove compartment
4	Remove cover in instrument cluster		AR68.10-D-1550A
5	Remove instrument cluster		AR54.30-D-6015C
6.1	Remove stowage compartment above glove compartment	Except code SA6, front passenger airbag	AR68.10-D-1515A
6.2	Remove front passenger airbag unit	with code SA6, passenger airbag	AR91.60-D-0680B
7	Remove cover for air nozzle on passenger side	with code SA6, passenger airbag	AR68.10-D-1090A
8	Remove loudspeaker		AR82.62-D-7833A
9	Remove center section of instrument panel
10	Remove air conditioning pushbutton control module		AR83.25-D-1124NA
11	Remove top part of instrument panel		AR68.10-D-1020NA
12	Remove central electric unit		AR54.25-D-1382A
13	Remove air nozzles in instrument panel		AR68.10-D-1110A
14	Remove instrument panel		AR68.10-D-1000NA
15	Unplug connector (1) from evaporator temperature sensor (2)
16	Remove evaporator temperature sensor (2) from heater housing
17	Install in the reverse order
18	Set time on instrument cluster
19	Set time on timer for auxiliary heater	With code H12 hot-water auxiliary heater or code H86 timer for auxiliary heater
20	code radio
21	Read out DTC memory	 Erase fault memory if necessary