S83.10-2004-06
1 Screw
2 Instrument panel
3 Insert
4 Screw
5 Bracket
6 Instrument panel bracket
M40m45 Blower motor
M40m45.1 Blower motor connector
| Removal, installation | ||
1 | Remove footwell cover on driver's side | Unhook footwell cover on one side | |
2 | Remove fog lamp switch | ||
3 | Unscrew screws (4) for bracket (5) on instrument panel bracket (6) | Push insert (3) up until screws (4) are visible. | |
4 | Remove bracket (5) | ||
5 | Cut through cable strap on protective cap for electric connectors on instrument panel bracket (6) | Installation: Replace cable strap. | |
6 | Disconnect blower motor connector (M40m45.1) | ||
7 | Unscrew screws (1) | ||
8 | Remove blower motor (M40m45) from heater housing | ||
9 | Reinstall in opposite order |