Remove/install air inlet

AR83.25-P-1401Q

Remove/install air inlet

16.2.12

 

Remove/install

Danger!

Risk of injury by trapping or crushing, in extreme cases with loss of limbs when working on windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A



Notes on battery

AH54.10-P-0001-01A

1

Open engine hood

2

Remove dust filter housing



Replace dust filter for heating/ventilation

AP83.00-P-8381P

3

Pull water collector (4) out of windshield frame

 Use pulling hooks to pull water collector (4) in direction of arrows out of windshield frame and remove to level of right-hand wiper shaft.

 Pulling hook

*140589023300

4

Remove nuts (5)

5

Unscrew nuts (6)

6

Remove air inlet

 Slightly raise water collector (4).

7

Install in the reverse order