P83.25-2034-06
1 Mounting screws
2 Coupling windscreen washer nozzle
3 Electric connector
4 Printed circuit board
| Removal, installation | ||
1 | Remove wiper arms | ||
2 | Unscrew 7 screws (1) | ||
3 | Remove cable strap (arrow) in center area | ||
4 | Lift air inlet | ||
5 | Separate coupling (2) of the washing nozzles | ||
6 | Separate electric connector (3) on the printed circuit board (4) | The printed circuit board is located at the air inlet on right side of vehicle. | |
N | Remove water hose and electric wiring through side opening at air inlet | ||
8 | Remove air inlet | ||
9 | Install in opposite order |