P83.25-2246-06
1 Electrical connector
2 Wiring harness
3 Bolts
4 Blower base
5 Electrical connector
6 Bolts
A32m1 Blower motor
A32n1 Blower regulator
Modification notes
| Remove/install | ||
1 | Remove cover below instrument panel on right | ||
2 | Disconnect electrical connector (1) and expose electrical wiring harness (2) | ||
3 | Remove bolts (3) using a cordless drill/driver and remove blower base (4) | Cordless drill/driver | |
4 | Disconnect electrical connector (5) of blower motor (A32m1) from blower regulator (A32n1) | ||
5 | Remove bolt (6) and concealed bolt (arrow) using a cordless drill/driver and take blower regulator (A32n1) off blower motor (A32m1) | Cordless drill/driver | |
6 | Install in the reverse order | ||
7 | Perform a function test |
Commercially available tools