P83.25-2408-04
1 Electrical connector
2 Electrical connector
3 Lug
4 Stop
A32m1 Blower motor
| Removing, installing | ||
1 | Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit | KEYLESS-GO start/stop button only on vehicles with code (889) Keyless-Go. | |
2 | Remove cover below dashboard on right | ||
3 | Disconnect electrical connectors (1, 2) | ||
4 | Turn blower motor (A32m1) in direction of arrow until lug (3) rests against end stop (4) | ||
5 | Remove blower motor (A32m1) downward | ||
6 | Install in the reverse order |