AR83.25-P-1124MCC | Remove and install air conditioning control and operating unit | 21.7.11 |
MODEL 451.3 /4 up to 30.8.10
with CODE (I01) Air conditioning Plus
except CODE (P02) car2go
MODEL 451.3
with CODE (I01) Air conditioning Plus
with CODE (P02) car2go
with instrument panel up to production date 30.8.10
P83.25-2278-06
1 Air distribution control lever
2 Screw
3 Flexible shaft
4 Guide wheel
5 Screwdriver
6 Electrical connector
7 Electrical connector
8 Locks
N23 Heater/AC operating unit
| Remove/install | ||
1.1 | Remove center stowage compartment on center part of dashboard | On vehicles without code (C50) smart radio 10 or without code (C57) smart radio 9 or without code (527) High-Line radio or without code (P02) car2go. | |
1.2 | Remove radio | On vehicles with code (C50) smart radio 10 or with code (C57) smart radio 9 or with code (527) High-Line radio or with code (P02) car2go. | |
* not for USA | |||
* for USA only | |||
2 | Turn air distribution control lever (1) to footwell ventilation position | ||
3 | Set temperature control lever and fan stage control lever to center position | ||
4 | Remove screws (2) on heater/air conditioning operating unit (N23) | ||
5 | Use a suitable screwdriver (5) to release bracket (arrow) of flexible shaft (3) and detach flexible shaft (3) from guide wheel (4) | ||
6 | Detach electrical connector (6) from heater/air conditioning operating unit (N23) | ||
7 | Release locks (8) and detach electrical connectors (7) | ||
8 | Remove heater/air conditioning operating unit (N23) | ||
9 | Remove flexible shaft (3) | When the operating unit is replaced Heater/AC (N23). | |
10 | Install in the reverse order | ||
11 | Perform function test on heater/air conditioning operating unit (N23) |