P83.20-2208-09
1 Heating/ventilation operating module
2 Connector
3 Bolt
4 Recirculated air cable
9 Lever
10 Air distribution cable
11 Catch
12 Lever
5 Catch
6 Lever
7 Heating cable
8 Catch
| Remove/Install | ||
1 | Remove instrument panel | ||
2 | Undo plug-in connection (2) | ||
3 | Unscrew screws (3) and remove heating/ventilation operating module (1) | Do not kink cables when removing the heating/ventilation operating module (1). Installation: if a heating/ventilation operating module (1) without centering system was fitted to the vehicle, shorten this by 10 to 15 mm (arrow) on the new heating/ventilation operating module (1). Push the heating/ventilation operating module (1) into the guide of the center console. Adjust cables on heating/ventilation operating module (1). Refer to: | |
Adjust cables on heating/ventilation operating module. | |||
4 | Unhook recirculated air cable (4) on heating/ventilation control module (1) | Installation: Insert recirculated air cable (4) in catch (5) and hook in on lever (6) | |
5 | Unhook heating cable (7) on heating/ventilation (1) | Installation: Insert heating cable (7) in catch (8) and hook in on lever (9). | |
6 | Unhook air distribution cable (10) on heating/ventilation operating module (1) | Installation: Insert air distribution cable (10) in catch (11) and hook in on lever (12). | |
7 | Install in the reverse order | ||
8 | Perform function check |