P83.10-2558-06
1 Catch
2 Air recirculation control cable
3 Heater/ventilation operating module
4 Clamp
5 Lever
| Remove/install | ||
1 | Remove cockpit switch group | ||
2 | Remove center air nozzle | ||
3 | Remove catch (1) on air recirculation control cable (2) and unhook air recirculation control cable (2) from heater/ventilation operating unit (3) | ||
4 | Remove clamp (4) on air recirculation control cable (2) and unhook air recirculation control cable (2) from air recirculation unit lever (5) | ||
5 | Remove air recirculation control cable (2) | Installation: When routing the cable, make sure that the air recirculation control cable (2) has unobstructed movement and that it functions. | |
Installation: The air recirculation control cable (2) must be routed and fastened in place such that any damage and vibration noise are prevented. | |||
6 | Install in the reverse order | ||
7 | Adjust air recirculation control cable (2) |