1 | Actuator motor |
2 | Screw |
3 | Electrical connector |
D83.10-1196-75
D83.10-1199-78
1 | Actuator motor | 5 | Driver | |
4 | Actuator rod | 6 | Blower housing |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
2 | Remove screw/bolts (2) . | ||
3 | Remove actuator motor (1) until the electrical connector (3) is accessible. | ||
4 | Disconnect electrical connector (3) and remove actuator motor (1). | ||
| Install | ||
5 | Connect electrical connector (3) at actuator motor (1). | ||
6 | Position driver (5) in direction of arrow (arrow A) over actuator rod (4) so that truncations (arrow B, arrow C) are aligned with each other. | ||
7 | Position actuator motor (1) at blower housing (6). | ||
8 | Screw in bolts (2). | ||
9 | Teach in and normalize actuator motor (1) and erase fault memory using vehicle diagnosis system. | ||
| |||
| Check | ||
10 | Carry out function test of actuator motor (1). |
Powiązane dokumenty
- ad0000d200006ts
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu