AR83.10-D-1400NA | Remove and install air distribution cables | 8.2.01 |
MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada
MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA
MODELS 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico
D83.10-1101-01
1 Cable for air distribution duct
| Remove | ||
1 | Remove center section of instrument panel | ||
2 | Remove air conditioning pushbutton control module | ||
3 | Unclip cables (1) at the heater housing and remove from the adjusting levers | ||
| Install | ||
4 | Clip cables (1) onto the adjusting levers | ||
5 | Attach cables (1) to the air conditioning pushbutton control module | Danger of attaching incorrectly: The cable on the lower adjusting lever must be attached to the front adjusting knurl of the air conditioning control and operating unit. | |
6 | Adjust cables for air distribution (1) | ||
7 | Install climate control pushbutton control module | ||
8 | Install center part of instrument panel | ||
11.1 | Set time on timer for auxiliary heater | With code H12, hot-water auxiliary heater or code H86, timer for auxiliary heater. |
Powiązane dokumenty
- ar6810d1030b Demontaż i montaż środkowej części tablicy rozdzielczej
- ar8310d140001a Regulacja cięgien rozdzielania nawiewu
- ar8325d1124na