ar8295p0005sc

Remove/install control unit for TELE AID emergency call system

Typ ar · temat 82.95 · wersja 0100 · 2010-10-21

Dotyczy: MODEL 216 with CODE (494) USA version

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.95 Systemy telefonu alarmowego — Seria 216

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.22 System telefonu alarmowego › 31.22.11 Moduł sterujący/ przekaźnik — Seria 216

AR82.95-P-0005SC

Remove/install control unit for TELE AID emergency call system

13.10.10

MODEL 216 with CODE (494) USA version

Remove/install control unit for TELE AID emergency call system

P82.95-2924-11

1 Antenna splitter

3 Nuts

N123/4 Emergency call system control unit

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Switch off ignition and remove the transmitter key from the EZS control unit

On vehicles with code (889) Keyless Go: Press keyless go start/stop button repeatedly until ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

2

Remove overpressure reservoir

Only with code (409) Left/right front multicontour seats or with code (432) Left and right dynamic multicontour seat

AR91.25-P-1570SX

3

Remove antenna splitter (1)

Do not disconnect electrically

4

Electrically disconnect emergency call system control unit (N123/4)

5

Unscrew nuts (3)

6

Remove emergency call system control unit (N123/4)

7

Install in the reverse order

Powiązane dokumenty