ar8295p0005c

Removing and installing TELE AID emergency call system control module

Typ ar · temat 82.95 · wersja 0100 · 2006-07-26

Dotyczy: MODEL 129 with CODE (347) TELE AID emergency call system (D2B) European version

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.95 Systemy telefonu alarmowego — Seria 129

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.22 System telefonu alarmowego › 31.22.11 Moduł sterujący/ przekaźnik — Seria 129

AR82.95-P-0005C

Removing and installing TELE AID emergency call system control module

6.10.98

MODEL 129 with CODE (347) TELE AID emergency call system (D2B)
European version

Removing and installing TELE AID emergency call system control module

P82.95-2090-06

1 Base mount

3 Retainer

4 Retainer

5 Nuts

6 Screws

A35 CTEL transmitter and receiver

A35/8 TELE AID control module

Removal, installation

1

Connect quiescent current retention unit

*WH58.30-Z-1012-09A

2

Disconnect ground lead from battery

3

Remove paneling below right rear seat

4

Disconnect connection leads and antenna lead from CTEL transmitter and receiver (A35)

5

Unscrew nuts (5)

6

Carefully lift mount (4) with control module

7

Pull connection lead and D2B connection lead off of TELE AID control module (A35/8)

Do not kink or stretch fiber optic cable D2B

Install caps on fiber optic cable connector and module connection

AR82.95-P-0005-01A

8

Unscrew TELE AID control module (A35/8) from mount (1) with 4 screws (6) and pull out

9

Install in opposite order

Commercially available tools

Number

Designation

WH58.30-Z-1012-09A

Quiescent current retention unit

Powiązane dokumenty