ar8285p7373tx

Remove/install navigation processor

Typ ar · temat 82.85 · wersja 0201 · 2008-04-08

Dotyczy: MODEL 219.3 up to 2.3.08 except CODE (809) Model year 2009 with CODE (527) COMAND APS (with navigation) with CODE (530) COMAND APS USA (with navigation system)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 219 (modele 3**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.55 Nawigacja › 31.55.11 Moduł sterujący/ przekaźnik — Seria 219 (modele 3**)

AR82.85-P-7373TX

Remove/install navigation processor

26.3.08

MODEL 219.3 up to 2.3.08
except CODE (809) Model year 2009
with CODE (527) COMAND APS (with navigation)
with CODE (530) COMAND APS USA (with navigation system)

Remove/install navigation processor

P82.86-8324-06

1 Cover

2 Removal plates

3 Electrical connector with fiber optic cable

4 Electrical connectors

5 Retaining spring

N41/1 Navigation processor

Modification notes

5.7.06

"Disconnect/connect battery ground line" removed

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Buffer basic data of navigation processor (N41/1) in STAR DIAGNOSIS

When installing new navigation processor (N41/1).

Installation: Transfer basic data from STAR DIAGNOSIS to new navigation processor (N41/1).

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04TX

2

Open the cover (1)

3

Insert removal tools (2) into navigation processor (N41/1)

Pay attention to "TOP" marking on removal tools (2).

4

Pull navigation processor (N41/1) on removal tool (2) out toward the front until the electrical connectors (4) and the electrical connector with fiber optic cable (3) on the rear of the navigation processor (N41/1) are accessible

Installation: Make sure that, when sliding in the navigation processor (N41/1), the electrical connector with fiber optic cable (3) and the electrical lines (4) are not pinched and thereby damaged.

5

Disconnect electrical connectors (4) and electrical connector with fiber optic cable (3) on rear of navigation processor (N41/1)

Notes on avoiding damage to fiber optic cables during repair work

With Media Oriented System Transport (MOST)

AH82.60-P-0001-05TX

6

Remove navigation processor (N41/1) from luggage compartment

7

Push back retaining springs (5) at left and right on navigation processor (N41/1) and pull out the removal tools (2)

8

Install in the reverse order

Powiązane dokumenty