ar8285p1000tx

Remove and install COMAND operating, display and controller unit

Typ ar · temat 82.85 · wersja 0202 · 2019-04-18

Dotyczy: Model 219.3 up to 3/2/08 with code 526 (COMAND with single DVD drive (without navigation)) with code 527 (COMAND APS with single DVD drive (with navigation)) with code 530 (COMAND APS USA (with navigation system)) except code 809 (Model year 2009)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.85 Systemy nawigacyjne i komunikacyjne — Seria 219 (modele 3**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.10 Headunit › 31.10.11 Moduł sterujący/przekaźnik — Seria 219 (modele 3**)

AR82.85-P-1000TX

Remove and install COMAND operating, display and controller unit

07.03.2019

Model

219.3 up to 3/2/08

with code 526 (COMAND with single DVD drive (without navigation))

with code 527 (COMAND APS with single DVD drive (with navigation))

with code 530 (COMAND APS USA (with navigation system))

except code 809 (Model year 2009)

Modification notes

05.07.2006

Disconnect/connect battery ground line removed

Remove and install COMAND operating, display and controller unit

Shown with code (819) CD changer

1

Ashtray housing

2

Electrical connector with fiber-optic cable (with code (819) CD changer)

3

Bracket

4

Electrical connectors

5

Screw

6

Center stowage compartment

7

CD changer holder (with code (819) CD changer)

8

Screw

9

Electrical connectors

A40/3

COMAND operating, display and control unit

P82.35-2379-06

Remove/install

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Temporarily store basic data of COMAND operating, display and controller unit (A40/3) in Star Diagnosis

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04TX

When replacing COMAND operating, display and controller unit (A40/3).

Installation: Transfer basic data from Star Diagnosis to COMAND operating, display and controller unit (A40/3).

2

Remove ashtray housing (1) from front center console

AR68.20-P-2400TX

3

Unclip electrical connector with fiber-optic cable (2) forward out of holder (3)

Topical note

Notes on avoiding damage to optical fibers during repair work

AH82.60-P-0001-05AK

For vehicles with code (819) CD changer

4

Unclip electrical connectors (4) from holder (3)

5

Remove screws/bolts (5)

6

Pull center stowage compartment (6) or CD changer holder (7) out of center console until screws (8) are accessible

CD changer holder (7) only for vehicles with code (819) CD changer.

7

Remove bolt (8)

8

Pull COMAND operating, display and controller unit (A40/3) out of center console until electrical connectors (9) are accessible

9

Disconnect electrical connectors (9) and remove COMAND operating, display and controller unit (A40/3)

10

Install in the reverse order

Powiązane dokumenty