Remove/install global positioning system (GPS) antenna

AR82.85-P-0002RG

Remove/install global positioning system (GPS) antenna

25.04.2018

Model

190

with code 348 (Emergency call/assistant system)

Model

190

with code 350 (Ecall emergency call system, Europe)

Model

190

with code 531 (COMAND APS)

1

Crossmember below instrument panel

2

Electrical line

3

2-pin connector

A2/23

GPS antenna

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Notes on working in engine compartment

AH60.00-P-0042-01RG

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

 

Remove/install

1

Open engine hood

AR88.40-P-1000RG

2

Attach front cover for magnesium radiator cross member



000 588 05 98 00 Cover

WS98.00-P-0011B


When working in the engine compartment, the front cover for the magnesium radiator cross member must be fitted into place to protect the magnesium radiator cross member.
Otherwise, the surface coating on the radiator cross member made of magnesium may be damaged.

3

Disconnect battery ground line

AR54.10-P-0003RG

4

Remove dashboard

AR68.10-P-1000RG

5

Remove crossmember under instrument panel (1)

AR68.10-P-1120RQ

6

Remove electrical line (2) from blue 2-pin connector (3)

7

Detach electrical line (2) from vehicle wiring harness

8

Remove GPS antenna (A2/23)

9

Install in the reverse order