Remove/install global positioning system (GPS) antenna

AR82.85-P-0002FR

Remove/install global positioning system (GPS) antenna

30.07.2018

Model

257, 290

with code 270 (Aerial for GPS)

1

Plug housing

3

Screwdriver

2

Fuse

Shown on model 257.### 1#

4

Screw

5

Grommet

A2/23

GPS antenna

M21/1

Left outside mirror

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1.1

Remove left outside mirror (M21/1).

Model 257.### 1# , 290.### 1#
with code 270 (Aerial for GPS)

AR88.70-P-9000FR

1.2

Remove right outside mirror.

Model 257.### 2# , 290.### 2#
with code 270 (Aerial for GPS)

AR88.70-P-9000FR

2.1

Remove trim at left outside mirror (M21/1).

Model 257.### 1# , 290.### 1#
with code 270 (Aerial for GPS)

AR88.70-P-9040FR

2.2

Remove trim at right outside mirror.

Model 257.### 2# , 290.### 2#
with code 270 (Aerial for GPS)

AR88.70-P-9040FR

3

Release telephone antenna and place to one side with line attached.

Model 257, 290
with code 270 (Aerial for GPS)
with code 274 (Telephone antenna)

AR82.62-P-0011FR

4

Remove retainer (2) at plug housing (1) of electric line of GPS antenna (A2/23) using a suitable screwdriver (3) (arrow A).

5

Release plug housing (1) (arrow B) and remove (arrow C).

6

Unscrew screw (4).

7

Pull electric line of GPS antenna (A2/23) out of grommet (5) and left outside mirror (M21/1) or right outside mirror.

 Installation: Check for correct routing of lines (arrow F).

8

Turn GPS antenna (A2/23) (arrow D) and remove (arrow E).

9

Install in the reverse order.