ar8280p0001mem

Remove/install tablet cradle

Typ ar · temat 82.80 · wersja 0100 · 2020-05-01

Dotyczy: Model 167.9 with code 224 (Rear individual seat design) with code M036 (Maybach version)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.80 Przenośne biuro — Seria 167 (modele 9**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.16 E-mail/Internet/komputer/tablet › 31.16.11 Moduł sterujący/przekaźnik/płyta stykowa — Seria 167 (modele 9**)

AR82.80-P-0001MEM

Remove/install tablet cradle

07.04.2020

Model

167.9

with code 224 (Rear individual seat design)

with code M036 (Maybach version)

Remove/install tablet cradle

P82.80-A003-09

1

Armrest

4

Electrical connector

2

Covers

A105/6

Tablet cradle electric controller unit

3

Bolts

A105/7

Tablet PC

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Connect diagnostic unit and read out data for takeover.

If the tablet cradle electric controller unit (A105/6) is replaced.

AD00.00-P-2000-06ME

2

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

3

Remove tablet PC (A105/7) from tablet cradle electric controller unit (A105/6).

4

Fold armrest (1) upward.

5

Remove covers (2) from underside of armrest (1).

6

Remove screw/bolts (3).

7

Lift tablet cradle electric controller unit (A105/6) until the electrical connector (4) on the underside is accessible.

8

Release and disconnect electrical connector (4) and remove tablet cradle electric controller unit (A105/6).

9

Install in the reverse order.

10

Commission tablet cradle electric controller unit (A105/6).

If the tablet cradle electric controller unit (A105/6) has been replaced.

AD00.00-P-2000-06ME

Powiązane dokumenty