ar8270p8920tx

Remove/install vehicle interface (cell phone)

Typ ar · temat 82.70 · wersja 0202 · 2019-04-18

Dotyczy: Model 219.3 up to 3/2/08 with code 386 (Comfort telephony) with code 388 (Telephone "Handy", UPCI system) except code 809 (Model year 2009)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.70 Telefon, system obsługi telefonu (SBS) — Seria 219 (modele 3**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.15 Instalacja telefoniczna › 31.15.11 Moduł sterujący/ przekaźnik/ płyta stykowa — Seria 219 (modele 3**)

AR82.70-P-8920TX

Remove/install vehicle interface (cell phone)

07.03.2019

Model

219.3 up to 3/2/08

with code 386 (Comfort telephony)

with code 388 (Telephone "Handy", UPCI system)

except code 809 (Model year 2009)

Modification notes

05.07.2006

Disconnect/connect battery ground line removed

Remove/install vehicle interface (cell phone)

P82.70-5344-09

1

Damping material

4

Carrier plate cover

7

Electrical connectors

2

Screw

5

Screw

8

Carrier plate

3

Catches

6

Electrical connection with fiber optic cable

N123/1

Universal Portable CTEL Interface (UPCI [UHI]) control unit

Remove/install

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Temporarily store basic data from UPCI (Universal Portable Cell Phone Interface) control unit (N123/1) in Star Diagnosis

AD00.00-P-2000-04TX

When replacing UPCI (Universal Portable Cell Phone Interface) control unit (N123/1).

Installation: Transfer basic data from Star Diagnosis to new UPCI (Universal Portable Cell Phone Interface) control unit (N123/1).

2

Remove damping (1)

3

Remove screws (2)

4

Release catches (3) using a suitable screwdriver and remove carrier plate cover (4)

5

Remove compensator control unit from UPCI (Universal Portable Cell Phone Interface) control unit (N123/1)

AR82.70-P-0030TX

Do not disconnect electrical connector from compensator control unit.

6

Remove screws/bolts (5)

7

Disconnect electrical connection with optical fiber (6)

Topical note

Notes on avoiding damage to optical fibers during repair work

AH82.60-P-0001-05AK

8

Disconnect electrical connectors (7) and remove UPCI (Universal Portable Cell Phone Interface) control unit (N123/1) from carrier plate (8)

9

Install in the reverse order

Powiązane dokumenty