AR82.70-P-8911B | Removing and installing CTEL transmitter and receiver | 9.6.98 |
MODEL 129 up to 30.6.00 with CODE (316) MB GSM cellular telephone (D2B)
P82.70-2122-06
1 Bracket
2 Nuts
3 Intermediate bracket
4 Sheet metal screw
5 Sheet metal screws
7 Interface intermediate wiring harness (transmitter/receiver)
A34/4 CTEL [TEL] interface
A35 CTEL transmitter and receiver
| Removal, installation | ||
1 | Connect quiescent current retention unit | ||
2 | Disconnect ground cable of battery | ||
3 | Remove side cover on left side of trunk | ||
4 | Unscrew nuts (2) | ||
5 | Carefully lift bracket (1) with control modules out of wheelhouse recess | Do not damage connection lines Do not kink or stretch fiber optic cable. | |
6 | Release connector from CTEL transmitter and receiver (A35) and disconnect | ||
7 | Disconnect antenna lead from CTEL transmitter and receiver (A35) | ||
8 | Unscrew sheet metal screw (4) | ||
9 | Pull out CTEL transmitter and receiver (A35) | ||
10 | Install in the reverse order |
Commercially available tools