ar8270p7379eee

Removing and installing cellular telephone interface

Typ ar · temat 82.70 · wersja 0101 · 2012-02-23

Dotyczy: MODEL 129 as of 1.7.00 with CODE (854) MB cellular telephone

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.70 Telefon, system obsługi telefonu (SBS) — Seria 129

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.15 Instalacja telefoniczna › 31.15.11 Moduł sterujący/ przekaźnik/ płyta stykowa — Seria 129

AR82.70-P-7379EEE

Removing and installing cellular telephone interface

21.2.12

MODEL 129 as of 1.7.00 with CODE (854) MB cellular telephone

Removing and installing cellular telephone interface

P82.70-3281-06

1 Cradle

2 Nuts

3 Bolt

4 Sheet metal screws (2 ea.)

5 Sheet metal nut

A28/3 E-network compensator

A34/4 CTEL [TEL] interface

Removal, installation

1

Connect quiescent current retention unit

*WH58.30-Z-1012-09A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground cable of battery

AR54.10-P-0003A

Notes on battery

All models.

AH54.10-P-0001-01A

3

Remove paneling on left side in trunk

4

Unscrew nuts (2) and screws (3)

5

Carefully lift cradle with control module out of spare wheel recess

Do not kink or stretch D2B fiber optic cable.

Do not damage connection line.

6.1

Disconnect connection lead from telephone interface (A34/4)

6.2

Disconnect connection lead on E-network compensator (A28/3)

Install caps on fiber optic cable connector and equipment connector

7

Remove telephone interface (A34/4) from cradle (1) by unscrewing 2 screws (4)

8

Install in the reverse order

Commercially available tools

Number

Designation

WH58.30-Z-1012-09A

Quiescent current retention unit

Powiązane dokumenty