ar8270p0010sc

Remove/install E-net compensator

Typ ar · temat 82.70 · wersja 0100 · 2006-07-26

Dotyczy: MODEL 216.3 with CODE (386) Preinstallation for telephone "Handy", UPCI system with CODE (388) Telephone "Handy", UPCI system

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.70 Telefon, system obsługi telefonu (SBS) — Seria 216 (modele 3**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.15 Instalacja telefoniczna › 31.15.11 Moduł sterujący/ przekaźnik/ płyta stykowa — Seria 216 (modele 3**)

AR82.70-P-0010SC

Remove/install E-net compensator

14.7.06

MODEL 216.3
with CODE (386) Preinstallation for telephone "Handy", UPCI system
with CODE (388) Telephone "Handy", UPCI system

Remove/install E-net compensator

P82.70-6399-06

1 Bracket (with code (218) Backup camera or code (390 to 396) Linguatronic or code (529) HIGH Class Japan or code (813) Voice control system (VCS [SBS]))

2 Nut (with code (218) Backup camera or code (390 to 396) Linguatronic or code (529) HIGH Class Japan or code (813) Voice control system (VCS))

3 Screw (with code (218) Backup camera or code (390 to 396) Linguatronic or code (529) HIGH Class Japan or code (813) Voice control system (VCS [SBS]))

4 Bracket

5 Nut

A28/3 E-net compensator

6 Electrical connectors

7 Bolts

Remove/install

Notes on avoiding damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Remove spare tire well paneling, loosen side paneling in trunk and pivot to side until E-net compensator (A28/3) is accessible.

AR68.30-P-4600SX

2.1

Undo nuts (2) and screw (3) and remove bracket (1)

For vehicles with code (218) Backup camera or with
code (390 up to 396) Linguatronic or with
code (529) HIGH Class Japan or with
code (813) Voice control system (VCS [SBS])

3

Undo nuts (5) and remove bracket (4) with E-net compensator (A28/3)

4

Detach electrical connectors (6) and remove E-net compensator (A28/3) with bracket (4)

5.1

Unscrew bolts (7) and remove E-net compensator (A28/3) from mount (4).

When replacing E-net compensator (A28/3).

6

Install in the reverse order

Powiązane dokumenty