Removing and installing E-network compensator

AR82.70-P-0010Q

Removing and installing E-network compensator

15.4.02

11.2.04

Disconnect/connect/remove ground lead from battery

 

Removal/installation

1

Remove rear seat rear cover

AR68.30-P-4600PB

2

Release and remove E-net compensator (A28/3)

 Do not bend or stretch fiber optical cable, in order to avoid any damage.

3

Detach coupling for fiber optical cable from E-net compensator (A28/3) and fit protective caps to coupling for fiber optical cable and to device connection

 Fiber optical cables must not be kinked, routed around sharp edges or bent to a radius of less than 25 mm, otherwise the fiber optical cable core will be yellowed and broken. Yellowed or broken fiber optical cables dim the light. Do not remove the protective caps too early, because contaminated or scratched surfaces dampen the light.

AR82.95-P-0005-01A

4

Release the electrical connectors (1) and detach from E-net compensator (A28/3)

5

Remove E-network compensator (A28/3)

6

Install in the reverse order

7

Perform function check