Remove/install speaker in roof stowage box

AR82.62-S-3006E

Remove/install speaker in roof stowage box

30.07.2014

MODEL

447.8

with CODE ZK7 (Marco Polo)

1

Rear headliner

6

Bolts

2

Carrier

7

Midrange speaker

3

locking eye

8

Electrical connector

4

Bolts

9

Tweeter

5

Roof stowage box, rear

10

Screw

 Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove rear headliner (1)

AR68.30-S-7608EE

 Installation: Perform function test of midrange speaker (7) and tweeter (9) after positioning the rear headliner (1) and connecting the midrange speaker (7) or tweeter (9).

2

Mark assembly position for lock striker (3) for rear end roof stowage box (5) and detach from carrier (2)

 Installation: Observe marking. Otherwise the flap for the rear end roof stowage box (5) does not close correctly.

3

Remove bolts (4) and detach carrier (2) from rear headliner (1)

 Installation: Check correct assembly position for carrier (2) on rear headliner (1).

4

Disconnect electrical connector (8)

5

Remove the respective screws/bolts (6) and remove the corresponding midrange speaker (7) from the carrier (2)

When removing the midrange speaker (7).

6

Remove respective screw/bolt (10) and remove the corresponding tweeter (9) from the carrier (2)

When removing the tweeter (9).

7

Install in the reverse order



Check

8

Perform function test of midrange speaker (7) and tweeter (9)