ar8262p8000rd

Remove/install Keyless-Go antenna

Typ ar · temat 82.62 · wersja 0101 · 2008-11-28

Dotyczy: MODEL 230.4 as of 1.3.06 with CODE (889) Keyless-Go except CODE (P99) Special model "AMG Black Series" In trunk

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 230 (modele 4**)

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.15 KEYLESS-GO › 29.15.14 Nadajnik/odbiornik — Seria 230 (modele 4**)

AR82.62-P-8000RD

Remove/install Keyless-Go antenna

30.10.08

MODEL 230.4 as of 1.3.06
with CODE (889) Keyless-Go
except CODE (P99) Special model "AMG Black Series"
In trunk

Remove/install Keyless-Go antenna

P82.62-3030-04

1 Floor Covering

A2/35 Left luggage compartment KEYLESS-GO antenna

Remove/install

1

Switch off the ignition and remove the transmitter key from the EIS control unit

Press Keyless Go start/stop button repeatedly until ignition is switched off.

Remove the transmitter key from the vehicle and store it in a location beyond its transmission range (at least 2 meters).

2

Open trunk lid

3

Open trunk partition

4

Take floor covering (1) out of luggage compartment

5.1

Remove spare tire

On vehicles with code (669) spare tire on steel rim

5.2

Remove trunk recess

On vehicles without code (669) Spare tire with steel rim

6

Remove vehicle tool kit and TIREFIT bracket

On vehicles without code (669) Spare tire with steel rim

7

Disconnect electrical connector for left luggage compartment Keyless Go antenna (A2/35)

8

Expose electrical wiring harness for left luggage compartment Keyless Go antenna (A2/35)

9

Lift catch tabs (arrows) and remove left luggage compartment Keyless Go antenna (A2/35)

Installation: Ensure left luggage compartment Keyless Go antenna (A2/35) is installed correctly.

10

Install in the reverse order