ar8262p8000rc

Removing and installing keyless go antenna

Typ ar · temat 82.62 · wersja 0100 · 2006-01-18

Dotyczy: MODEL 230.4 as of 1.3.06 with CODE (889) Keyless Go Left and right door

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 230 (modele 4**)

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.15 KEYLESS-GO › 29.15.14 Nadajnik/odbiornik — Seria 230 (modele 4**)

AR82.62-P-8000RC

Removing and installing keyless go antenna

23.12.05

MODEL 230.4 as of 1.3.06 with CODE (889) Keyless Go
Left and right door

Removing and installing keyless go antenna

P82.62-3031-09

1 Door foil

2 Electrical connector

A2/38 Left door Keyless Go antenna

A2/40 Right door Keyless Go antenna

3 Fastening shackles

4 Recesses

5 Nuts

Remove/install

Danger!

Risk of fire and explosion caused by machining/treating magnesium components

Keep away from ignition sources and open flames.

AS60.00-Z-0006-01R

Information on machining/treating magnesium components

AH60.00-P-0023-01R

1

Switch off the ignition and remove the transmitter key from the EIS control unit

Press Keyless Go start/stop button repeatedly until ignition is switched off.

Remove the Keyless Go transmitter card or transmitter key from the vehicle and store beyond the reach of the transmitter

(min. 2 m).

2

Remove door lining from left or right front door

AR72.10-P-1000R

3

Carefully detach door foil (1) in area A

Door foil (1) must not be damaged, otherwise it must be replaced.

4

Disconnect electrical connector (2)

5

Remove screws and remove left door Keyless Go antenna (A2/38) or right door Keyless Go antenna (A2/40)

Installation: Ensure correct seating of fastening shackles (3) in the cutouts (4) in the inner door panel and correct seating of left door Keyless Go antenna (A2/38) or right door Keyless Go antenna (A2/40) at the nuts (5).

6

Install in the reverse order

Powiązane dokumenty