ar8262p8000ha

Removing and installing keyless go antenna

Typ ar · temat 82.62 · wersja 0106 · 2020-01-21

Dotyczy: Model 240 with code 889 (KEYLESS-GO) on rear end panel

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 240

EinPAS 29 System uprawniający do jazdy/zabezpieczający › 29.15 KEYLESS-GO › 29.15.14 Nadajnik/odbiornik — Seria 240

AR82.62-P-8000HA

Removing and installing keyless go antenna

20.01.2020

Model

240

with code 889 (KEYLESS-GO)

on rear end panel

Removing and installing keyless go antenna

1

Bolts

2

Electrical connector

A2/88

KEYLESS-GO rear antenna

P82.62-2398-11

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Remove rear bumper

AR82.10-P-4905H

Remove reflector strip only.

3

Unscrew screws (1) and remove Keyless Go rear antenna (A2/88)

Until electrical coupling (2) is accessible.

4

Disconnect electrical coupling (2)

5

Remove Keyless Go rear antenna (A2/88)

6

Install in the reverse order

Powiązane dokumenty