ar8262p7719rg

Remove/install bass speaker amplifier

Typ ar · temat 82.62 · wersja 0104 · 2019-10-01

Dotyczy: Model 190.3 up to model year 2016 with code 811 (High-End sound system)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.62 Głośnik, wzmacniacz, antena — Seria 190 (modele 3**)

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.75 Odtwarzanie audio/przekazy głosowe › 31.75.11 Moduł sterujący/ przekaźnik — Seria 190 (modele 3**)

AR82.62-P-7719RG

Remove/install bass speaker amplifier

01.10.2019

Model

190.3

up to model year 2016

with code 811 (High-End sound system)

Remove/install bass speaker amplifier

1

Electrical connector

2

Screw

N40/12

Woofer amplifier

P82.62-4250-06

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on HANDS-FREE ACCESS

AH80.61-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmission range (min. 2  m)

2

Remove right paneling in trunk

AR68.30-P-4800RG

3

Release and disconnect electrical connection (1)

4

Remove screws/bolts (2) from woofer amplifier (N40/12)

5

Remove woofer amplifier (N40/12)

6

Install in the reverse order

Powiązane dokumenty