Remove/install roof antenna with antenna base

AR82.62-D-1220TS

Remove/install roof antenna with antenna base

24.09.2019

Model

907, 910

Shown with code FF8 (1-DIN slot under headliner)

1

Roof antenna

4

Bracket

2

Electrical connector

5

Front overhead control panel

3

Screw

 Danger

Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area.

AS65.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1.1

Release front overhead control panel (5) and move out of working area with connected electric lines.

Model 907, 910
except code FF8 (Single-size slot at front under roof liner)
except code H1B (Tachograph controls at front under roof lining)

AR82.20-D-1100TS

1.2

Remove device installation frame from roof lining.

Model 907, 910
with code FF8 (Single-size slot at front under roof liner)
Model 907, 910
with code H1B (Tachograph controls at front under roof lining)


Carefully remove device installation frame.
Otherwise, the headliner or device installation frame may be damaged.

 Clip remover

*452589016300

2

Release and disconnect electrical connectors (2).

 The number of electrical connections (2) may vary depending on vehicle equipment.

3

Unscrew screw (3) far enough until holder (4) can be turned.

4

Have a second person secure roof antenna (1) from outside to prevent it from falling down and turn holder (4) counterclockwise up to end stop.

5

Remove roof antenna (1) from outside.



Clean

6

Clean area around roof cutout of roof antenna (1).

Cleaner Teroson SB 450

*BR00.45-Z-1089-04A

7

Install in the reverse order.



Check

8

Check all functions of roof antenna (1).

Repair materials

Number

Designation

Order number

BR00.45-Z-1089-04A

Cleaner Teroson SB 450

A 000 989 31 00