AR82.61-P-7412GI | Removing and installing APS radio and navigation operating unit | 20.10.99 |
MODEL 170 with CODE (353) Audio 30 APS
P82.61-2535-06
Using Model 463 as an example
A2/29 Radio and navigation operating unit
1 Connector strip
2 D2B fiber optic cable connector
3 Antenna connector
4 Removal plates
P82.61-2536-05
A2/29 Radio and navigation operating unit
A Pressure surface for installation
| Remove/install | ||
1 | Pull out radio and navigation operating unit (A2/29) | | |
For this purpose slide in removal plates (4) Press retaining springs (arrow) back on removed radio (A2) and pull out removal plates (4) | |||
Installation: Press radio and navigation operating unit in only at points marked with (A) with max. 100 N. | |||
2 | Disconnect electrical connectors ( to 3) from rear of radio and navigation operating unit (A2/29) | Do not kink or stretch D2B fiber optic cable (2) | |
3 | Install in the reverse order | ||
4 | Encode radio | When replacing radio and navigation operating unit (code 353) reconfigurate unit and activate radio code. If reinstalling the same unit, it is only necessary to activate the radio code. see: | |
Code radio. | |||
Configurate radio and navigation operating unit (APS) | |||
Voice output is loaded automatically within 20 minutes after the radio and navigation operating unit is connected. |
Commercially available tools
Powiązane dokumenty
- ar8260p750201b Kodowanie radia
- ar8261p741202gi Konfiguracja radia i panelu obsługi systemu nawigacji (APS)