Model | 219.3 as of 3/3/08 |
with code 510 (Audio 20 CD with 6-disc CD changer) | |
with code 511 (Audio 50 APS with DVD changer) | |
with code 512 (COMAND APS with DVD changer) | |
with code 523 (Audio 20 CD) | |
with code 525 (MB Audio 50 APS radio) | |
with code 527 (COMAND APS with single DVD drive (with navigation)) | |
Model | 219.3 |
with code 510 (Audio 20 CD with 6-disc CD changer) | |
with code 511 (Audio 50 APS with DVD changer) | |
with code 512 (COMAND APS with DVD changer) | |
with code 523 (Audio 20 CD) | |
with code 525 (MB Audio 50 APS radio) | |
with code 527 (COMAND APS with single DVD drive (with navigation)) | |
with code 809 (Model year 2009) |
1 | Bolts |
2 | Electrical connector |
3 | Electrical connector |
4 | Electrical connector |
5 | Electrical connector |
A2 | Radio (with code (510) Audio 20 with CD changer or code (523) MB Audio 20 radio) |
A2/56 | Radio control panel and navigation unit (with code (511) Audio 50 APS with DVD changer or with code (525) MB Audio 50 APS radio) |
A40/3 | COMAND operating, display and controller unit (with code (512) COMAND APS with DVD changer or code (527) COMAND APS with single DVD drive (with navigation)) |
P82.60-6451-06
| Remove/install | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Temporarily store basic data of radio (A2) or radio control panel and navigation unit (A2/56) or COMAND operating, display and controller unit (A40/3) in STAR DIAGNOSIS | When replacing the radio (A2) or radio control panel and navigation unit (A2/56) or COMAND operating, display and controller unit (A40/3). | |
| |||
Installation: Transfer cached basic data to the new radio (A2) or the new radio control panel and navigation unit (A2/56) or the new COMAND operating, display and controller unit (A40/3). | |||
2 | Remove upper control panel control unit holder | ||
3 | Unscrew screws (1) as far as the end stop | ||
4 | Remove radio (A2) or radio control and navigation unit (A2/56) or COMAND operating unit, display and controller unit (A40/3) from the center console until electrical connectors (2, 3, 4, 5) are accessible at the rear | ||
5 | Disconnect electrical connectors (2, 3, 4, 5) at rear of radio (A2) or radio control panel and navigation unit (A2/56) or COMAND operating, display and controller unit (A40/3) | ||
Topical note | Notes on avoiding damage to optical fibers during repair work | ||
The electrical connectors (2, 3, 4, 5) can vary depending on the equipment installed. Depending on the equipment installed, electrical connectors with fiber-optic cable can also be installed. | |||
Installation: Ensure that the electrical connectors (2, 3, 4, 5) are correctly locked in the radio (A2) or the radio control unit and the navigation unit (A2/56) or the COMAND operating, display and controller unit (A40/3). | |||
6 | Install in the reverse order |
Powiązane dokumenty
- ad0000p200004tx
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah8260p000105ak Wskazówki dotyczące zapobiegania uszkodzeniom światłowodów podczas napraw
- ar5421p1262ty Demontaż i montaż modułu sterującego górnego panelu obsługi