ar8260p7502a

Removing and installing radio

Typ ar · temat 82.60 · wersja 0101 · 2004-10-21

Dotyczy: Model 129 with single-block unit, two-component control module and CD drive with radio control module, 1st generation

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.60 Radio, Audio-Video — Seria 129

EinPAS 31 Komunikacja/ informacja/ rozrywka › 31.65 Radio › 31.65.11 Moduł sterujący/ przekaźnik — Seria 129

AR82.60-P-7502A

Removing and installing radio

17.6.98

Model 129
with single-block unit, two-component control module and CD drive with radio control module, 1st generation

Removing and installing radio

P82.60-2009-06

1 Cover

2 Removal plates

A2 Radio

A2/2 Radio control module

A2/4 CD drive and radio control module

Removing and installing radio

P82.60-2011-01

A2 Radio

A2/1 Radio control module

A2/2 Line-out unit

Removal, installation

1

Disconnect ground cable of battery

AR54.10-P-0003A

2

To check, press radio into console at outer left and right cover (1) toward front of vehicle

The retaining clips which clip into the radio at the bottom right and left (arrow) can only be unclipped when the radio is completely inserted.

3

Pull out radio (A1), radio control module (A2/4) or CD drive and radio control module (A2/2)

For this purpose slide removal plates (2) in up to stop at a distance of approx. 5 mm from outer edge of cover (1) at an angle of approx. 45° between cover (1) and wooden cover, lift slightly and pull out.

*129589000500

4

Disconnect electrical connectors

5.1

Convert line-out unit (sound system) (A2/1)

Only with code 810 and when replacing Becker Mexico Diversity radios up to approx. 08/90 and Becker Mexico Compact-Disc up to approx. 01/92.

6

Install in the reverse order

7

Encode radio

AR82.60-P-7502-01C

Removing and installing radio

Removal tool

129 589 00 05 00

Powiązane dokumenty