P82.60-9702-08
Show except code B01 (48V technology) |
1 | Electrical connectors | 3 | Bracket | |
2 | Screw | A90/4 | Tuner unit |
P82.60-9711-08
Shown with code B01 (48V technology) |
1 | Electrical connectors | 4 | Nuts | |
3 | Bracket | A90/4 | Tuner unit |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage to optical fibers during repair work | ||
Notes on HANDS-FREE ACCESS | |||
| Remove/install | ||
1 | Carry out initial startup of tuner unit (A90/4) | When replacing tuner unit (A90/4). | |
| |||
2 | Remove trunk recess cover | ||
3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
4 | Remove on-board electrical system battery |
| |
5 | Disconnect electrical connectors (1) and cover optical fibers | ||
6.1 | Remove bolts (2) | Model 238.3 except code B01 (48V technology) | |
6.2 | Unscrew nuts (4) | Model 238.3 with code B01 (48V technology) | |
7 | Remove tuner unit (A90/4) with bracket (3) from trunk | ||
8 | Remove tuner unit (A90/4) from bracket (3) | When replacing tuner unit (A90/4). | |
9 | Install in the reverse order |
Powiązane dokumenty
- ad0000p200006lwo
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ah8061p000101a Wskazówki na temat HANDS-FREE ACCESS
- ah8260p000105ak Wskazówki dotyczące zapobiegania uszkodzeniom światłowodów podczas napraw
- ar5410p0009lwk
- ar6830p4600lwo
- as0000z001101a Niebezpieczeństwo zranienia przez zakleszczenie lub zmiażdżenie palców podczas demontażu, montażu i prac regulacyjnych przy pokrywach, drzwiach i oknie dachowym.