ar8235s6002c

Remove/install windshield washer system pump

Typ ar · temat 82.35 · wersja 0100 · 2012-09-07

Dotyczy: MODEL 415

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.35 Spryskiwacze — Seria 415

EinPAS 36 Widoczność › 36.30 Wycieraczki/ spryskiwacze › 36.30.41 Pompa/ zbiornik/ wymiennik ciepła — Seria 415

AR82.35-S-6002C

Remove/install windshield washer system pump

4.9.12

MODEL

415

Remove/install windshield washer system pump

Shown with CODE W78 (Window in liftgate/rear-end door with wiper/washer system)

1

Electrical connector

2

Hose

M5/1

Windshield washer system pump

M5/11

Front and rear windshield washer system pump

S82.35-4519-05

Remove/install

1

Loosen front section of right fender liner

AR88.10-S-1310C

Do not remove front section from fender liner completely.

2

Disconnect electrical connection (1)

3

Disconnect hoses (2) from the windshield washer system pump (M5/1) or front and rear windshield washer system pump (M5/11)

Collect washer fluid which flows out.

Installation: Observe assignment of hoses (2).

4

Remove windshield washer system pump (M5/1) or front and rear windshield washer system pump (M5/11)

To do this, remove windshield washer system pump (M5/1) or front and rear windshield washer system pump (M5/11) from the seal.

Installation: Replace seal.

5

Install in the reverse order

Check

6

Check windshield washer system

Windshield wipers, windshield washer system and headlamp cleaning system - function check

AP82.30-S-8252CV

Powiązane dokumenty