Remove/install windshield washer nozzle

AR82.35-P-6970H

Remove/install windshield washer nozzle

10.01.2020

Model

240

5

Windshield washer nozzle

1

Cover

2

Bolts

3

Catch tabs

4

Washer fluid hose

5

Windshield washer nozzle

6

Spray nozzle heater connector coupling

7

Catch tabs

 

Remove/install

 Danger

Risk of fire/risk of explosion due to short circuit and escaping oxyhydrogen gas. Risk of (burn) injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte/mist, short circuit and arcing. Risk of poisoning caused by swallowing battery electrolyte or absorption of lead through the skin or body orifices. Risk of death due to voltage U >= 30 V AC and U >= 60 V DC.

No fires, sparks, open flames, or smoking. Wear acid-resistant gloves, clothing, and glasses. Pour battery acid only into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003H

Topical note

Notes on battery

AH54.10-P-0001-01A

2

Remove cover (1) from hood

Only with center and left spray nozzle.

 Remove screw/bolts (2) . Release cover (1) using catch tabs (3) and remove from hood.

3

Detach washer fluid hose (4) from spray nozzle (5) forward in direction of arrow

4

Detach spray nozzle heater connector coupling (6) from spray nozzle (5)

5

Press catch tabs (7) of spray nozzle (5) together (see arrow picture at bottom left) and pull out toward front

6

Install in the reverse order

7

Check fluid level of windshield washer system, top up if necessary

8

Perform function check of windshield wipers and windshield washer system