ar8235p6002me

Remove/install windshield washer system pump

Typ ar · temat 82.35 · wersja 0101 · 2019-07-25

Dotyczy: Model 167

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.35 Spryskiwacze — Seria 167

EinPAS 36 Widoczność › 36.30 Wycieraczki/ spryskiwacze › 36.30.41 Pompa/ zbiornik/ wymiennik ciepła — Seria 167

AR82.35-P-6002ME

Remove/install windshield washer system pump

23.07.2019

Model

167

Remove/install windshield washer system pump

Shown with code 874 (MAGIC VISION CONTROL, heated)

1

Electrical connectors

2

Washer fluid hose

3

Seal

4

Washer fluid hose

M5/1

Windshield washer system pump

M5/5

Liftgate windshield washer system pump

P82.35-A003-06

Danger

Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.

Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.

AS82.35-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Remove left front wheel and tire assembly.

AR40.10-P-1102ME

3

Remove rear section of left front fender liner.

AR88.10-P-1301ME

4

Release and disconnect electrical connections (1).

The number of electrical connectors (1) varies depending on the vehicle equipment.

5

Release washer fluid hoses (2) at arrows and disconnect.

Collect escaping washer fluid using suitable container.

6

Release washer fluid hose (4) and disconnect.

Model 167
with code 874 (MAGIC VISION CONTROL, heated)

7

Remove windshield washer system pump (M5/1).

8

Remove liftgate window washer system pump (M5/5).

Model 167
with code 874 (MAGIC VISION CONTROL, heated)

9

Check seal (3) of windshield washer system pump (M5/1) or liftgate window washer system pump (M5/5).

If there is a problem,

Replace relevant seal (3).

10

Install in the reverse order.

11

Correct fluid level of windshield washer system.

AP82.35-P-8210E

Check

12

Perform function test and visual check of windshield washer system.

AP82.35-P-8252F

Powiązane dokumenty