P82.35-2509-07
Shown on model 451.3
1 Washing water reservoir
2 Electrical connector
5 Nut
M5/1 Windshield washer fluid pump
3 Hose (on model 451.3)
4 Hose
| Remove/install | ||
1 | Remove front module | ||
2 | Suction off window washer fluid in washer fluid reservoir (1) | ||
3 | Unscrew nuts (5) from washer fluid reservoir (1) | Installation: Replace self-locking nuts (5). | |
4 | Remove washer fluid reservoir (1) until windshield washer fluid pump (M5/1) is accessible | ||
5 | Detach electrical connector (2) from windshield washer fluid pump (M5/1) | ||
6 | Unclip windshield washer fluid pump (M5/1) from washer fluid reservoir (1) and place to one side with connected hoses (3, 4) | On model 451.4 only the hose (4) is installed. | |
Installation: Ensure that seal of windshield washer fluid pump (M5/1) is correctly seated on washer fluid reservoir (1). | |||
7 | Take off washer fluid reservoir (1) | ||
8 | Detach hose (3) from windshield washer fluid pump (M5/1) | On model 451.3 | |
9 | Detach hose (4) from windshield washer fluid pump (M5/1) and remove windshield washer fluid pump (M5/1) | ||
10 | Install in the reverse order | ||
11 | Fill washer fluid reservoir (1) | ||
| Windshield washer system - inspect fluid level, adjust to correct level | ||
12 | Perform tightness check of washer fluid reservoir (1) | ||
13 | Perform function check of windshield washer system |
Powiązane dokumenty
- ap8235p8210mcc Układ spryskiwaczy szyb - kontrola, korekta poziomu płynu
- ar6230p1575mcc