AR82.35-P-6000QBS | Remove/install washer fluid reservoir of windshield washer system | 27.6.07 |
MODEL 209 with CODE (P98) Black Series
P82.35-2530-11
1 Washing water reservoir
1s Clamping bolt
2 Water hose
3 Water hose
4 Electrical connector
M5/1 Windshield washer fluid pump
M5/2 HCS [SRA] pump
S42 Windshield washer fluid level indicator switch
| Remove/install | ||
1 | Remove dust filter | ||
| Replace dust filter for heating/air conditioning | ||
2 | Detach electrical connector (4) from windshield washer fluid level indicator switch (S42) | ||
3 | Release clamp bolt (1s) and lift washer fluid reservoir (1) | ||
4 | Remove windshield washer fluid pump (M5/1) and place to one side with lines attached | Collect washer fluid which flows out. | |
5 | Remove HCS [SRA] pump (M5/2) and place to one side with lines attached | ||
6 | Take out washer fluid reservoir (1) | ||
7 | Remove windshield washer fluid level indicator switch (S42) | When replacing the washer fluid reservoir | |
8 | Install in the reverse order | ||
9 | Correct windshield washer system fluid level | ||
| Check windshield washer system fluid level and correct if necessary |
Powiązane dokumenty
- ap8235p8210p Układ spryskiwaczy szyb - sprawdzenie, korekta poziomu płynu
- ap8300p8381p Wymiana filtra przeciwpyłkowego układu ogrzewania / wentylacji