P82.30-2637-06
1 Screw
2 Electrical connector
3 Bracket
4 Wiper system
M6/1 Wiper motor
| Remove/install | ||
1 | Remove front module | ||
2 | Disconnect electrical connector (2) from wiper motor (M6/1) | ||
3 | Remove bracket (3) with rubber grommet from wiper motor (M6/1) | ||
4 | Remove bolts (1) starting from the right and take off wiper system (4) | The wiper motor (M6/1) is not available separately, but instead it can only be replaced in combination with the wiper system (4). | |
Installation: Tighten bolts (1) starting from the left. | |||
| |||
5 | Install in the reverse order | ||
6 | Perform function test of wiper system (4) with wiper motor (M6/1) |
Windshield wiper