Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.30 Wycieraczki — Seria 118 · Seria 177 · Seria 247
EinPAS 36 Widoczność › 36.30 Wycieraczki/ spryskiwacze › 36.30.50 Mechanizm wycieraczek — Seria 118 · Seria 177 · Seria 247
AR82.30-P-6100-01MFA
Adjust wiper arms
Model
118, 177, 247
Test and adjustment values for wiper arms
Number
Designation
Model 118
Model 177
BE82.30-P-1003-01M
Angle of incidence of driver-side wiper arm in parked position
Left-hand drive vehicle
°
+3,4...+7,4
+3,4...+7,4
Right-hand drive vehicle
°
-3,4...-7,4
-3,4...-7,4
Test and adjustment values for wiper arms
Number
Designation
Model 247
BE82.30-P-1003-01M
Angle of incidence of driver-side wiper arm in parked position
Left-hand drive vehicle
°
+3,5...+7,5
Right-hand drive vehicle
°
-3,5...-7,5
Test and adjustment values for wiper arms
Number
Designation
Model 118
Model 177
BE82.30-P-1004-01M
Angle of incidence of passenger-side wiper arm in parked position
Left-hand drive vehicle
°
+3,3...+7,3
+3,3...+7,3
Right-hand drive vehicle
°
-3,3...-7,3
-3,3...-7,3
Test and adjustment values for wiper arms
Number
Designation
Model 247
BE82.30-P-1004-01M
Angle of incidence of passenger-side wiper arm in parked position
Left-hand drive vehicle
°
+3,4...+7,4
Right-hand drive vehicle
°
-3,4...-7,4
205 589 00 21 00
Adapter
211 589 02 21 00
Adjusting tool set
Use adjustment lever (Z4) from adjustment tool set to adjust wiper arms.
P82.30-2306-04
1
Mount angle gauge (A) with adapter (F) onto wiper arm to be adjusted.
2
Position adjustment levers (Z4) as far apart from one another as possible on wiper arm to be adjusted.
3
Place the adjustment levers (Z4) crosswise one over the other in the required direction until the angle gauge (A) shows the correct adjustment value on the scale.
Wiper arms are crossed axially using adjustment lever (Z4) positioned near to angle gauge (A). The second adjustment lever (Z4) is used as a counterholder.
4
Remove adjustment levers (Z4) from wiper arm.
P82.30-3517-12
5
Read off angle of incidence of adjusted wiper arm on scale of angle gauge (A) and correct any deviation in the adjustment value.
6
Remove angle gauge (A) with adapter (F) from adjusted wiper arm.
