Replace windshield wiper blade

AR82.30-D-6252TS

Replace windshield wiper blade

07.02.2018

Model

907, 910

Shown on model 907 with code FM3 MAGIC VISION CONTROL

1

Wiper arm

3

Latch

2

Wiper blade

4

Hose

 Danger

Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin.

Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children.

AS82.35-Z-0001-01A

 Warning

Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.

When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).

AS82.30-Z-0001-01A

 

Remove/install

1

Move wiper arms (1) into lower end position

2

Switch off ignition and store transmitter key outside of transmission range (min. 2 m)

3

Open engine hood

4

Mount wiper arm (1)


Do not allow wiper arm (1) to fold back uncontrolled.
Otherwise there will be damage to the windshield or wiper blade (2).

5

Carefully release latch (3) on the sides (arrows A) and remove from wiper arm (1) (arrow B)

6

Remove wiper blade (2) from wiper arm (1)

7

Detach hose (4) from wiper blade (2)

Model 907, 910
with code FM3 (MAGIC VISION CONTROL)

8

Install in the reverse order



Check

9

Perform function check of windshield washer system and windshield wiper system



AP82.30-D-8252TS