Check wiper arms · ar8230d600001ts · Mercedes-Benz WIS

AR82.30-D-6000-01TS	Check wiper arms
 Warning	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).	AS82.30-Z-0001-01A
	Notes on wiper arm adjustment		AH82.30-P-0001-01A

Model

907, 910

Test and adjustment values for wiper arms

Number	Designation			Model 907, 910
BE82.30-N-1001-01M	Angle of incidence of driver-side wiper arm in parked position	Left-hand drive vehicle	°	+6,0...+4,0
		Right-hand drive vehicle	°	-6,0...-4,0

Test and adjustment values for wiper arms

Number	Designation			Model 907, 910
BE82.30-N-1002-01M	Angle of incidence of passenger-side wiper arm in parked position	Left-hand drive vehicle	°	+6,0...+4,0
		Right-hand drive vehicle	°	-6,0...-4,0

Test and adjustment values for wiper arms

Number	Designation			Model 907, 910
BE82.30-N-1003-01M	Angle of incidence of driver-side wiper arm in reversing position	Left-hand drive vehicle	°	-2,5...-4,5
		Right-hand drive vehicle	°	+2,5...+4,5

Test and adjustment values for wiper arms

Number	Designation			Model 907, 910
BE82.30-N-1004-01M	Angle of incidence of passenger-side wiper arm in reversing position	Left-hand drive vehicle	°	-2,5...-4,5
		Right-hand drive vehicle	°	+2,5...+4,5

205 589 00 21 00

Adapter

211 589 02 21 00

Adjusting tool set

D82.30-0046-77

Shown on model 907.### 1#, on driver-side wiper arm (1)

 Use the following special tools:
 Angle gauge (A) from  adjustment tool set (211 589 02 21 00)
 Adapter (B) (205 589 00 21 00)

1	Insert  adapter (B) into guide of  angle gauge (A) and fix in place with screw at  angle gauge (A).

2	Fold up driver-side wiper arm (1) and attach  angle gauge (A) together with  adapter (B) at wiper blade mount.

3	Lower driver-side wiper arm (1) until all three contact points at base of  angle gauge (A) are in contact with windshield.

4	Read angle of incidence of driver-side wiper arm (1) on scale of  angle gauge (A), and note.

5	 Remove angle gauge (A) together with  adapter (B) from driver-side wiper arm (1).

6	Repeat testing procedure for passenger-side wiper arm.

7	Move wiper arms to parked position and repeat testing procedure for driver-side wiper arm (1) and passenger-side wiper arm.

 When changing from reversing position to parking position, make sure that driver-side wiper arm (1) and passenger-side wiper arm do not make direct contact with windshield.
Otherwise the windshield may be damaged.

8	Compare recorded check values with adjustment values.

Powiązane dokumenty

ah8230p000101a Wskazówki dotyczące regulacji ramion wycieraczek
as8230z000101a Niebezpieczeństwo zakleszczenia lub zmiażdżenia, w skrajnym przypadku obcięcia kończyn podczas prac przy układzie mechanicznym wycieraczki