ar8220s5614e

Remove/install interior lamp in rear load compartment

Typ ar · temat 82.20 · wersja 0101 · 2015-03-09

Dotyczy: MODEL 447.6/7 with CODE LC2 (LED light strip in load compartment)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.20 Oświetlenie wewnętrzne — Seria 447 (modele 6**, 7**)

EinPAS 30 Instalacja oświetleniowa › 30.20 Oświetlenie wewnętrzne › 30.20.20 Lampa wewnętrzna — Seria 447 (modele 6**, 7**)

AR82.20-S-5614E

Remove/install interior lamp in rear load compartment

9.3.15

MODEL

447.6/7

with CODE LC2 (LED light strip in load compartment)

Remove/install interior lamp in rear load compartment

S82.20-4609-09

1

Clip remover

E27

Load compartment work lamp LED light strip

Remove/install interior lamp in rear load compartment

2

Electrical connector

E27

Load compartment work lamp LED light strip

S82.20-4610-11

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip load compartment work lamp LED light strip (E27) with clip remover (1) in area of retaining clips (arrows), as shown

Clip remover

*452589016300

2

Detach load compartment work lamp LED light strip (E27) far enough so that the electrical connector (2) is accessible

3

Disconnect the electrical connector (2) and remove the load compartment work lamp LED light strip (E27)

Installation: Check retaining clips of the load compartment work lamp LED light strip (E27).

If retaining clips are damaged:

Replace retaining clip.

4

Install in the reverse order

Check

5

Perform function check of load compartment work lamp LED light strip (E27)

Remove/install interior lamp in rear load compartment

452 589 01 63 00

Clip remover

Powiązane dokumenty