ar8220s5602e

Remove/install bulbs of front dome lamp

Typ ar · temat 82.20 · wersja 0100 · 2014-06-30

Dotyczy: MODEL 447.6/7 without CODE LC4 (Comfort overhead control panel) without CODE LD0 (Overhead control panel with 2 reading lamps)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 82 Układ elektryczny, nadwozie › 82.20 Oświetlenie wewnętrzne — Seria 447 (modele 6**, 7**)

EinPAS 30 Instalacja oświetleniowa › 30.20 Oświetlenie wewnętrzne › 30.20.20 Lampa wewnętrzna — Seria 447 (modele 6**, 7**)

AR82.20-S-5602E

Remove/install bulbs of front dome lamp

04.06.2014

MODEL

447.6/7

without CODE LC4 (Comfort overhead control panel)

without CODE LD0 (Overhead control panel with 2 reading lamps)

Remove/install bulbs of front dome lamp

1

Lamp sockets

2

Bulb

E15/3

Dome lamp, front of rear

S82.20-4569-12

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip dome lamp, front of rear (E15/3)

AR82.20-S-0110E

Do not disconnect electrical connectors for the dome lamp, front of rear (E15/3).

2

Twist lamp sockets (1) 90 degrees counterclockwise and remove

3

Pull bulbs (2) out of the lamp sockets (1)

Do not touch the bulbs (2) with bare fingers.
Use a grease-free, soft cloth and ensure correct seating in the lamp sockets (1).

4

Install in the reverse order

Check

5

Perform a function check of the dome lamp, front of rear (E15/3)

Powiązane dokumenty