Remove/install front overhead control panel

AR82.20-S-1100E

Remove/install front overhead control panel

14.12.15

Model

447, 448

1

Long wedge

2

Lock

3

Electrical connectors

N70

Overhead control panel (OCP [DBE]) control unit



Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A



Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Unclip and lower overhead control panel (OCP [DBE]) control unit (N70)

  Insert long wedge (1) between overhead control panel (OCP [DBE]) control unit (N70) and headliner and push back lock (2).

 Installation: Ensure that wiring harnesses are routed properly.

 Long wedge

*115589035900

2

Detach electrical connections (3)

 The number of electrical connectors (3) can vary depending on the equipment.

3

Remove overhead control panel (OCP [DBE]) control unit (N70) from headliner

4

Install in the reverse order

5

Initialize anti-theft alarm system (ATA [EDW]) control unit with diagnostic system

Model 447
with code FY1 (Anti-Theft Protection package)
Model 447
with code FZ5 (Anti-theft alarm system)
When replacing the overhead control panel (OCP [DBE]) control unit (N70).



AD00.00-S-2000-04E

6

Normalize sliding roof

Model 447
with code D27 (Electric tilting/sliding glass sunroof)
Model 447
with code ZK7 (Equipment line MARCO POLO)

7

Normalize panoramic sliding roof

Model 447, 448
with code D34 (Electric tilting/sliding glass sunroof, fixed panoramic roof)



Check

8

Carry out function test of all systems to be operated by the overhead control panel (OCP [DBE]) control unit (N70)